Ngā momo kirihou mō ngā rauemi mīhini CNC
E whakamahia whānuitia ana ngā kirihou CNC i roto i ngā ahumahi nui katoa mai i te hanga ki te motuka. Kei raro nei ngā momo kirihou e tukuna ana e Gazfull mō te hanga ritenga i runga i te tono.
Ngā Kirihou Mīhini e Tukuna ana
Ka taea te whakamahi i ngā kirihou CNC mō ngā momo wāhanga mai i ngā tauira tuatahi ki ngā tauira hangarau tae atu ki ngā wāhanga whakamahinga whakamutunga. Ahakoa he uaua te mīhini i ngā kirihou, he maha ngā wā ka pai ake te mīhini i te māmā me te matotoru me ngā āhuahanga māmā i te tānga 3D, i te werohanga rānei. He tino pakari te nuinga o ngā rauemi e whai ake nei, he nui te ātete ki te ngenge, te kore e pakaru, me te mimiti i te ru. Ko ētahi atu kirihou he rauemi whakamahinga whānui e ngāwari ake ana te mīhini, nō reira he pai mō te whakamātautau i ngā hoahoa i te utu iti, pērā i te ABS. I runga i te āhua o tō kaupapa, ko te kirihou mīhini pea te rauemi pai rawa atu mō ō wāhanga ritenga. Tirohia ā mātou rauemi i raro nei:
Te Mīhini CNC i roto i te HDPE
Ko te Polyethylene Matotoru-Teitei, HDPE rānei, he kirihou hangarau e whakamahia whānuitia ana i roto i te umanga takai. Ka taea hoki te whakamahi i te miihini CNC i roto i te HDPE hei hanga waahanga mo nga umanga hanga, hiko, me nga umanga motuka, me etahi atu. He tino pai te ōwehenga kaha-ki-taumaha o te HDPE, me te ātete pai ki nga matū me te makuku.
Mō te HDPE mō te Mīhini CNC
I ētahi wā ka karangatia te HDPE ko te PEHD (polyethylene high-density) ā, he wāhanga ia o te whānau kirihou polyethylene (PE). Ahakoa tōna ingoa, he iti noa te matotoru o te HDPE i te LDPE (polyethylene iti-density). Heoi, he nui ake te rerekētanga o te kaha i waenga i ngā kirihou e rua i te rerekētanga o te matotoru. Nā tēnei ka waiho te HDPE hei whiringa pai mō ngā tono e hiahia ana ki te kaha nui me te taumaha iti. He rite te miihini CNC i roto i te HDPE ki ērā o ētahi atu kirihou hangarau.
He Tirohanga Poto ki te HDPE
| tono | painga | huakore | Wā Lead | Price | Ngā Manawanui |
|---|---|---|---|---|---|
Ngā paipa, ngā tīwiri kawe, ngā takai me ngā ipu | He ātete matū me te makuku teitei, he ōwehenga kaha-ki-kiato teitei, he rite ki te FDA mō te rokiroki kai. | Te whānui wera nui, te ngoikore o te hononga | Ka tīmata i te 3 rā | Waenga ($$) | Ka taea te whakatutuki i te paerewa ±0.010″; ±0.002″; kei te wātea te iti iho i te ±0.002″ i muri i te arotake ā-ringa |
HDPE whānui
Ka puta he wāhanga kaha engari he māmā i roto i te mīhini CNC i roto i te HDPE. He tino ātete hoki ngā wāhanga HDPE ki te waikura ki te whānuitanga o ngā matū. Ko ngā whakamahinga noa ko ngā wāhanga poti, ngā paipa, me ngā ipu.
Ngā Āhuatanga HDPE Whānui
| Te Kaha Tana, Tukua (MPa) | Whakaroa i te Whati (%) | Maama (Tatahi D) | Te Pāmahana Whakarerekē Wera @ 0.45MPa | Ira Whakarewa (°C) |
|---|---|---|---|---|
20-30 | > 500 | 60-70 | 45-60 | 130-137 |
Kia mōhio: Hei tohutoro anake. Ka rerekē pea ngā uara i runga i te momo, te kaihanga, ngā tikanga tukatuka, me ngā tāpiringa.
Kua oti
Pērā i ētahi atu kirihou o te whānau PE, he tino ātete te HDPE ki ngā paninga. He rite tonu te take e ātete ai ki ngā piripiri, ā, me hono mā te whakarewa kirihou. He mā te nuinga o te wā e wātea ana te HDPE, engari i ētahi wā ka kitea i roto i ētahi atu tae. Ka tūtohu mātou kia waiho ngā wāhanga HDPE i roto i tō rātou āhua "kua oti te mīhini" mō ngā take kua whakahuatia i runga ake nei.
Ka rite ki te WaihoHe rite tonu ngā wero o te miihini CNC i roto i te HDPE ki ērā e pā ana ki ētahi atu kirihou hangarau. He āhua matte te mata miihini o te HDPE.
Te pupuhi pirepire: Mō te āhua ōrite o te mata, ka taea te pania te wāhanga ki ngā pītiti karāhe angiangi hei tango i ngā tohu taputapu me te whakanui ake i te āhua matte. Heoi, ka taea e ngā kirihou pania pītiti te hanga i ngā mata kāore i te ōrite, te kino rānei i ngā āhuatanga tino taipitopito.
Ngā Tohutohu Hoahoa Penapena Utu
Ka taea e te miihini CNC i roto i te HDPE te whakaputa i ngā wāhanga mama me te iti te utu. Kei raro nei ētahi atu tohutohu penapena utu hei whakapai ake i te ohanga o te whakaputanga.
Ngā Huinga-iti : Ka hokona te HDPE hei pepa, hei rakau rānei i roto i ngā rahi rerekē. He whakaaro pai te hoahoa i ngā wāhanga hei wāhanga motuhake ka taea te huihui hei wāhanga whakamutunga. E ai ki te kōrero i runga ake nei, kāore te HDPE e pai te mahi me ngā piripiri engari ka taea te whakarewa. Waihoki, ka taea te whakamahi i ngā whakapiri miihini hei whakapiri i ngā wāhanga.
Manawanui: Nā te mea ka whānui haere ina pāngia e te wera, he uaua te whakatutuki i ngā manawanui tino kikī i te mahi me te HDPE. Ka tūtohu mātou kia kīia noa ngā manawanui kia kikī ake i te +/- 0.010″ ina tika ana hei whakaiti i te pikinga o te para, te utu, me ngā wā arahi e pā ana ki ngā manawanui kikī i runga i ngā kirihou pēnei.
Mīhini CNC Acetal (Delrin)
He kirihou wera kaha te Acetal, e mōhiotia ana hoki e ōna ingoa waitohu, ko Delrin®, Tecaform® me Sustarin®. He tino pai ōna āhuatanga miihini me te ātete pāmahana ki te whakatauritea ki ētahi atu kirihou noa. He ngāwari ki te miihini, ā, he tino pumau te āhua. Nā tēnei huinga o ngā āhuatanga ka tino pai te miihini CNC i Delrin mō ngā wāhanga miihini tino tika pērā i ngā taputapu me ngā peera. Ka kitea ngā wāhanga Delrin i roto i ngā taputapu hiko kaihoko pērā i ngā pūreretā me ngā pouaka whakaata.
Miihini Miihini Acetal
Ko Delrin te ingoa hokohoko a DuPont mō te homopolymer acetal. He pai ake ōna āhuatanga miihini i te acetal copolymer me te whakapainga nui o te ātete pānga. Haunga ōna āhuatanga miihini tino pai, ka tukuna e te acetal mīhini CNC te pumau o ngā āhuatanga e pai ai mō ngā wāhanga tino tika.
Acetal i te Tirohanga Poto
| tono | painga | huakore | Wā Lead | Price | Ngā Manawanui |
|---|---|---|---|---|---|
Ngā wāhanga miihini tino tika pērā i ngā peera, ngā pūkaha, ngā taputapu, me ngā wāhanga takirere | He ātete pai ki te ngenge, he iti te waku, he pakari pai te katoa, he ātete ki te makuku | Te pūngao o waenganui, te ātete matū iti, te āhua o te ngokingoki i raro i te kawenga pumau | Ka tīmata i te 3 rā | Waenga ($$) | Ka taea te whakatutuki i te paerewa ±0.010″; ±0.001″; kei te wātea te iti iho i te ±0.001″ i muri i te arotake ā-ringa |
Delrin 150
Nā te kaha o te ātete ki te pānga me te iti o te waku, he pai rawa te Delrin CNC-mīhini mō ngā taputapu, ngā wāhanga pūnaha tatau, me ngā pūwero. He māmā, he iti te utu hei whakakapi i ngā wāhanga whakarewa, ā, i roto i ngā huarahi maha, ka hono i te āputa i waenga i ngā kirihou me ngā whakarewa. Ka taea hoki e Delrin te pupuri i ōna āhuatanga puta noa i te awhe pāmahana mai i te -40C ki te 120C, he awhe nui atu i te nuinga o ngā kirihou ka taea te aro atu.
Ngā Whare o Delrin 150
| Te Kaha Tana, Tukua (MPa) | Whakaroa i te Whati (%) | Maamaa (Rockwell M) | Te Pāmahana Whakarerekē Wera (°C) i te 0.46 MPa | Ira Whakarewa (°C) |
|---|---|---|---|---|
73-76 | 25-45 | 94 | 160-169 | 175-178 |
Kia mōhio: Hei tohutoro anake. Ka rerekē pea ngā uara i runga i te momo me te kaihanga.
Delrin 100 (AF)
He ranunga Delrin a Delrin 100 AF kua whakaranua ki ngā muka PTFE (Teflon) hei whakarei ake i te ātete ki te kakahu me ngā āhuatanga iti-waku o te rauemi. Nā tēnei ka tino pai te rauemi mō ngā tono e hiahia ana kia iti te kakahu, kia iti rānei te waku, pērā i ngā peera. Ka āwhina hoki ngā muka PTFE ki te whakapai ake i te kaha, te pakari, me te pumau o ngā āhuatanga o te rauemi.
Ngā Taonga o Delrin 100 (AF)
| Te Kaha Tana, Tukua (MPa) | Whakaroa i te Whati (%) | Maamaa (Rockwell M) | Te Pāmahana Whakarerekē Wera (°C) i te 0.46 MPa | Ira Whakarewa (°C) |
|---|---|---|---|---|
53-56 | 10-19 | 77 | 160-169 | 175-178 |
Kia mōhio: Hei tohutoro anake. Ka rerekē pea ngā uara i runga i te momo me te kaihanga.
Kua oti
Pērā i te nuinga o ngā kirihou mō te miihini, he iti noa ngā momo whakaotinga mata ka taea e ngā wāhanga acetal te whakaae. Kei raro nei ā mātou kōwhiringa whakaotinga mata matua mō ngā wāhanga acetal/Delrin i miihinihia e te CNC.
Hei Mīhini : Ka taea te hanga i tētahi āhua mata tino pai mai i te mīhini CNC. Ka tutuki tēnei i ngā kaihanga Gazfull mā te whakamahi i ngā taputapu tapahi HSS koi (maitai tere-rahi) me ngā koki rake me te koki whakawātea teitei e tika ana.
Te Pānga Pīra : Ka kitea ngā tohu taputapu i ngā wāhanga acetal, Delrin rānei i hangaia ki te CNC. Ka taea te whakamahi i te pānga pīra hei whakaiti i ngā tohu taputapu. He mea nui kia mōhio ka mārama ake te tae o te mata i te pānga pīra, ka puta te hina pouri ki ngā rauemi mangu i muri i te tukatuka.
Ngā Tohutohu Hoahoa Penapena Utu
Ko te Acetal (Delrin) tētahi o ngā kirihou utu nui rawa atu i te mākete, nō reira he mea nui kia whai i ngā mātāpono penapena utu i raro nei.
Hoahoa ki ngā rahi paerewa: Ko te acetal ka tukuna i roto i ngā rau matotoru paerewa, i ngā āhua whakaputa rānei pērā i ngā pae totoka. Mā te whakarite kia uru tō wāhanga ki roto i ngā rahi paerewa ka āwhina i te whakaiti i te para rauemi me te karo i ngā ota ritenga, ka piki ake te utu me te wā arahi.
Kaua e whai kia iti rawa te matotoru o te pakitara: Ahakoa ka taea te whakatutuki, tera pea he uaua ki te whakapiri me te whakaputa anō i ngā matotoru iti rawa o te pakitara me te kore e piko, e piko, e haruru rānei, ā, ka piki ake te utu. Kāore mātou e tūtohu kia heke iho i te 0.060″-0.080″ te matotoru o te pakitara mō ngā wāhanga acetal.
Mīhini CNC Polypropylene (PP)
Ko te Polypropylene (PP) he kirihou wera-haurua-kiriata e rua ngā āhua; ka taea te tito mai i ngā homopolymers, i ngā copolymers rānei. Ko te polypropylene homopolymer te momo tino whānui, engari he rerekē ngā taumata o te ethylene i konatunatua ki te copolymer polypropylene. Tērā pea he uaua ake te mahi miihini polypropylene i ētahi atu kirihou noa nā te mea ka taea te rewa me te pirau. Nā te ātete matū pai o te Polypropylene me tōna kaha ngenge, he tino whai hua mō ngā wāhanga ngāwari me ngā wāhanga e pāngia ana e ngā taiao waikura.
He kirihou māmā, kore-BPA te polypropylene (PP) he ātete tino pai ki te ngenge me te pakari. Nā ēnei āhuatanga i rongonui ai hei rauemi mō te whakamahi i roto i te whānuitanga o ngā tono puta noa i ngā ahumahi motuka, tākai, me ngā hua kaihoko.
Te Tirohanga Poto ki te Mīhini Polypropylene (PP)
| tono | painga | huakore | Wā Lead | Price | Ngā Manawanui |
|---|---|---|---|---|---|
Ngā ipu kai kore-BPA, ngā taputapu hiko, ngā taputapu whare | He iti te mātotoru, he ātete matū ki ngā momo waikawa me ngā kawakore, he ātete ngenge nui | Kāore e pai mō ngā whakamahinga pāmahana teitei, ka pirau ina pāngia e te hihi UV | Ka tīmata i te 3 rā | Waenga ($$) | Ka taea te whakatutuki i te paerewa ±0.010″; ±0.002″; kei te wātea te iti iho i te ±0.002″ i muri i te arotake ā-ringa |
Polypropylene Generic
Ahakoa he uaua te mahi miihini CNC i roto i te polypropylene nā te mea ka rewa, ka memeha, he maha ngā painga o te polypropylene homopolymer mō ngā wāhanga miihini CNC. Nā tōna mata maeneene he mea tino pai mō ngā mea miihini pēnei i ngā taputapu, ā, nā tōna ātete ki te ngenge he ngāwari te whakauru i ngā āhuatanga angiangi pēnei i ngā inihi ora ki roto i ngā hoahoa.
Ngā Āhuatanga Polypropylene Whānui
| Te Kaha Tana, Tukua (MPa) | Whakaroa i te Whati (%) | Maama (Tatahi D) | Te Wera Pawera Pawera (°C) | Ira Whakarewa (°C) |
|---|---|---|---|---|
25-40 | 100-600 | 65-75 | 100 @ 0.45 MPa | 160-170 |
Kia mōhio: Hei tohutoro anake. Ka rerekē pea ngā uara i runga i te momo, te kaihanga, me te whakakī.
Kua oti
He ma te tae o ngā wāhanga polypropylene. Kāore e pai te PP ki ngā whakaotinga mata pērā i ngā peita. Nā te āhua wai-kore hoki e uaua ai te tae.
Kua Mīhinihia : Ko te kōwhiringa whakaoti mata e tino kitea ana mō te hunga katoa e mīhini ana i te polypropylene CNC ko te waiho noa i te wāhanga kia rite ki te mīhini. Tērā pea he tohu taputapu e kitea ana i ngā mata kua mīhinihia.
Te Pūwero Pīra : Ko te mīhini CNC i roto i te polypropylene ka waiho he pūwero ki ngā taha o te wāhanga, ā, ka rewa ngāwari te polypropylene ina pā atu ki te taputapu tapahi, ka hua ake he āhua mata iti iho i te pai. Mā te pūwero pīra ka whakaitihia tēnei mā te tango i ēnei hapa iti me ngā rauemi pūwero e āwhina ana ki te tango i ngā tohu taputapu kia puta ai he āhua mata ōrite ake, ōrite ake hoki.
Ngā Tohutohu Hoahoa Penapena Utu
He iti te utu o te mahi miihini CNC i roto i te polypropylene nā te iti o te utu o te rauemi. Heoi, he mea nui te whakaiti i te nui o te wā mīhini me te wā tukatuka-muri kia iti ai ngā utu. Ko tētahi huarahi e taea ai tēnei ko te pupuri i ngā paerewa o ngā manawanui:
+/- 0.010” mō ngā āhuatanga o te rahi (roa, whānui, teitei, whānui)
+/- 0.010” mō te tauwāhi (tūnga, āputaputa, ōritetanga)
Kaua e whakahua i ngā taunga pakari ake ina kore e tika. He mea nui rawa tēnei nā te mea ka puta te wera i te mīhini kirihou, ka taea ai e tēnei te piko, te neke rānei i ngā āhuatanga.
Mīhini CNC UHMW-PE
Ko te Ultra-high Molecular Taumaha Polyethylene, te UHMW Polyethylene me te UHMW-PE rānei hei whakarapopototanga, he huinga iti o ngā matū HDPE (high-density polyethylene) me ētahi atu painga.
Mō te UHMW-PE mō te Mīhini CNC
Mā ngā mekameka pūmua tino roa o te rauemi ka pai ake tōna pakari whānui. He rite te tauwehenga waku ki te Teflon, engari he pai ake te ātete ki te pakū. He rite te miihini CNC i roto i te UHMW-PE ki te miihini i ētahi atu kirihou hangarau.
He kirihou hangarau matatau te UHMW-PE, he pakari rawa, he ātete matū, he ātete kakahu hoki, he pai ake i te maitai. E whakamahia whānuitia ana te UHMW-PE i roto i ngā ahumahi motuka me te moana. Nā te iti o te porowhita me te koretake o te matū, ka haumaru hoki mō te kai.
Tirohanga Poto ki te UHMW-PE
| tono | painga | huakore | Wā Lead | Price | Ngā Manawanui |
|---|---|---|---|---|---|
Ngā arai mō ngā arawhata, ngā kōtaha arataki mekameka, ngā arai parepare o te tauranga | He ātete tino pai ki te pakū, he pakari tino pai, he iti te tauwehenga waku | Kāore i te pai mō ngā pāmahana tiketike, he ngāwari ki te ngokingoki nā te iti o te pumau o te taha | Ka tīmata i te 3 rā | Waenga ($$) | Ka taea te whakatutuki i te paerewa ±0.010″; ±0.002″; kei te wātea te iti iho i te ±0.002″ i muri i te arotake ā-ringa |
UHMW-PE
Ka hangaia e te miihini UHMW ngā wāhanga pakari, ātete ki te pakū, he mea tino pai mō ngā mahi e pāngia ana e ngā kawenga pānga me ngā rauemi pakū. Ko ngā mahi noa ko ngā pereti kakahu me ngā hiri. He ngāwari te ngokingoki o te UHMW-PE, ā, kāore i te tino pai mō ngā mahi e pāngia tonutia ana ngā wāhanga e te ahotea.
Ngā Taonga Whānui o te UHMW-PE
| Te Kaha Tana, Tukua (MPa) | Whakaroa i te Whati (%) | Maama (Tatahi D) | Te Wera Pawera Pawera (°C) | Ira Whakarewa (°C) |
|---|---|---|---|---|
20-30 | 300-600 | 60-70 | 46-68 @ 0.46 MPa | 130-136 |
Kia mōhio: Hei tohutoro anake. Ka rerekē pea ngā uara i runga i te momo me te kaihanga.
Kua oti
Nā te iti o te tauwehenga waku o te UHMW-PE, he ātete tūturu ki ngā paninga nā te mea he uaua te piri ki te mata maeneene. Ka tūtohu mātou kia waiho te UHMW-PE i roto i tōna āhua mīhini; heoi, ka taea e Gazfull te whakauru i ngā pupuhi pāpāho me ngā whakaotinga ritenga mēnā e hiahiatia ana.
Kua Mīhinihia : Ko te hua o tēnei he whakaotinga me ngā tohu taputapu e kitea ana, me te taratara o te mata e rite ana ki te whakaotinga 125 uin Ra.
Pupuhitanga Pīra : Ka taea te pupuhi i te UHMW-PE ki ngā pīra hei tango i ngā hapa i puta mai i te tukanga tapahi.
Ngā Tohutohu Hoahoa Penapena Utu
Mā te Mīhini UHMW Polyethylene ka puta he wāhanga mama, he iti hoki te utu. Kei raro nei ētahi atu tohutohu mō te penapena tahua.
Ngā Huinga-iti : Ka taea te hoko i te UHMW-PE hei pepa, hei rakau rānei i roto i ngā rahi rerekē. Tērā pea he pai ki te hoahoa i ngā wāhanga hei wāhanga motuhake ka taea te whakakotahi ki te wāhanga whakamutunga. Me mōhio kāore te UHMW-PE e pai te mahi me ngā piripiri engari ka taea te whakarewa.
Ngā mahi pai a te DFM : Kei roto i ēnei ko te hoahoa i ngā radius kokonga ōrite, te hoahoa mō ngā āhuatanga nui ake kaua mō ngā āhuatanga iti maha, me te whakamahi i ngā manawanui paerewa o +/- 0.010.
Mīhini CNC Nairona 6/6
Ko te nairona, arā, ko te polyamide, he pūhui hanga kirihou wera. Hei kirihou wera, ka taea te hanga kia rerekē ngā āhua mā te hanga wera. Ahakoa ka taea te hanga i te nairona hei muka mō te taura me te papanga, te whakaputa, me te werohanga, he painga ōna ina hangaia mā te miihini CNC. He tino pai ngā āhuatanga ātete wera, ā-mīhini, me te matū o te nairona ina tapahia mai i te rakau totoka.
He kirihou hangarau whānuitia te nairona 6/6, he pakari, he ātete ki te pakū, me ōna āhuatanga pakeke. Nā ngā āhuatanga nairona 66 i pai ai mō ngā wāhanga miihini e mau ana i te kawenga, ā, he pai hoki hei whakakapi mō ngā konganuku. Mā te miihini CNC i roto i te nairona 6/6 ka puta he wāhanga iti te utu, he mahi teitei.
| tono | painga | huakore | Wā Lead | Price | Ngā Manawanui |
|---|---|---|---|---|---|
Ngā wāhanga hanganga pēnei i ngā taputapu, ngā wira, me ngā anga hiko kaihoko | Ātete ki te pakū, ātete pāmahana teitei, ātete ngenge teitei | Te mimiti nui o te makuku e pupuhi ai | Ka tīmata i te 3 rā | Iti ($) | Ka taea te whakatutuki i te paerewa ±0.010″; ±0.002″; kei te wātea te iti iho i te ±0.002″ i muri i te arotake ā-ringa |
Nylon 6/6
Ko te nairona 6/6, e tuhia ana ko te nairona 6-6, te nairona 6,6, te nairona 66 rānei, he momo tioata ake o te nairona 6. E kiia ana hoki ko te polyamide 66, ko te PA 66 rānei. Kua whakapai ake i ngā āhuatanga miihini nā tōna hanganga ngota ngota. Ko te rauemi nairona 6/6 mō te miihini kua whakapai ake i te ātete pāmahana me te iti ake o te mimiti wai ina whakaritea ki te nairona 6 paerewa. Ko ngā whakamahinga noa ko ngā papa kakahu, ngā wira arataki, me ngā peera reti.
Ngā Āhuatanga Rauemi o te Nairona Whānui 6/6
| Te Kaha Tana, Tukua (MPa) | Whakaroa i te Whati (%) | Maama (Tatahi D) | Te Wera Pawera Pawera (°C) | Ira Whakarewa (°C) |
|---|---|---|---|---|
30-98 | 1-300 | 78-88 | 75-428 | 197-266 |
Kia mōhio: Hei tohutoro anake. Ka rerekē pea ngā uara i runga i te momo me te kaihanga.
Kua oti
Pērā i te nuinga o ngā kirihou, he iti noa ngā whiringa whakaoti mata. He tino pēnei te āhua o te nairona, kāore e ngāwari te whakakikorua. Hei tāpiri, mā te oro ka puta he mata pakarukaru, ā, he maha ngā wā ka kino ake te āhua i te mata mīhini. Kei raro nei ētahi whakaotinga pea:
I te mea kua mīhinihia : Ko te mīhini CNC i roto i te nairona 6/6 ka waiho he āhua mata tino pai. Ka tutuki tēnei i ngā kaimahi mīhini Gazfull mā te whakamahi i ngā taputapu tapahi HSS (maitai tere-rahi) koi me ngā koki rake me te koki whakawhāiti teitei e tika ana.
Pahūtanga Pīra: Ka taea te whakamāeneene ake i te nairona 6/6 mā te whakamahi i ngā mahi pupuhi pīra kia iti ake ai te taratara o te mata.
Te Matenga : Ka mimiti wawe te nairona i te wai, nō reira he mea noa te tae. Ka whakamahia ngā tae whakarewa hei tae i te mata o ngā wāhanga nairona mā ki ngā tae rerekē.
Ngā Tohutohu Hoahoa Penapena Utu
He kirihou hangarau iti te utu o te nairona 6/6, heoi, hei penapena i ngā utu miihini, ngana ki te whai i ēnei:
Kia māmā noa ngā wāhanga: hei whakaiti i ngā whakaritenga mīhini me te whakaiti i te utu o te mīhini e hiahiatia ana (arā, mā te whakamahi i te mīhini tuaka-3, kaua ki te mīhini tuaka-4, tuaka-5 rānei), kia māmā noa te āhua o te mahi. He pai ake pea te whakamahi i te wāhanga he uaua te āhua o te mahi mō te tā 3D ki te Nylon 12 mā te SLS (selective laser sintering) HP Multi Jet Fusion rānei.
Kia ōrite ngā wāhanga: kia ōrite ngā inenga o ngā radius kokonga o roto me ngā kōhao kua patohia hei whakaiti i te maha o ngā whakawhiti taputapu e hiahiatia ana e te kaihanga.
Mō te Mīhini CNC Kiriaku
He kirihou wera te kiriaku e mōhiotia ana mō tōna māramatanga whatu, tōna kaha, me tōna pumau ki te hihi UV, ā, he mea rongonui hei whakakapi mō te karāhe i roto i ngā mahi maha. He mama, he ātete ki te pānga, ā, kāore i rite ki ētahi atu kirihou mārama, kāore e memeha ina roa te noho ki te rā.
Ahakoa he tino kaha, he pakari hoki tōna, kāore te kiriaku e pai mō ngā taiao pāmahana teitei, inā koa ka whakaritea ki te karāhe. Nā ēnei āhuatanga, he whānui te whakamahinga o te kiriaku mīhini i roto i ngā ahumahi pēnei i te motuka me te whakamātautau me te ine.
Tirohanga Poto ki te Kiriaku
| tono | painga | huakore | Wā Lead | Price | Ngā Manawanui |
|---|---|---|---|---|---|
Ngā porowhita taputapu me ngā taupoki rama waka, ngā mea whakamarara rama, ngā pouaka mārama. Ka taea te whakamahi hei whakakapi mō te karāhe, he iti te utu, he māmā hoki. | He ātete pānga teitei, he mārama te tirohanga, he ātete UV teitei | Kāore e tino ātete ki te rakuraku me te wera, he tairongo ki ētahi matū (hei tauira, te acetone, te waipiro) | Ka tīmata i te 3 rā | Iti ($) | Ka taea te whakatutuki i te paerewa ±0.010″; ±0.002″; kei te wātea te iti iho i te ±0.002″ i muri i te arotake ā-ringa |
kiriaku
He rauemi pakari te kiriaku, he maha ngā painga i runga i te karāhe. Tuatahi, ka taea te mahi miihini i te kiriaku, engari kāore e taea e te karāhe. Mā tēnei ka taea e koe te mahi miihini CNC i roto i te kiriaku ina hiahiatia he āhuahanga uaua me te māramatanga whatu teitei i te wāhanga whakamutunga. Nā te māramatanga o te kiriaku, he mea tino pai mō ngā matapihi tirotiro, ngā taputapu whakamātautau matū, me ngā uhi taputapu.
Ngā Āhuatanga Kiriaku Whānui
| Te Kaha Tana, Tukua (MPa) | Whakaroa i te Whati (%) | Maama (Tatahi D) | Te Pāmahana Whakarerekē Wera (°C) i te 0.45MPa | Ira Whakarewa (°C) |
|---|---|---|---|---|
65-75 | ~ 2-10 | ~ 80-90 | 105-110 | 85-110 |
Kia mōhio: Hei tohutoro anake. Ka rerekē pea ngā uara i runga i te momo me te tukanga hanga. Mō ngā tono nui, tirohia ngā pepa raraunga rauemi motuhake (hei tauira, mai i ngā kaihanga pēnei i a Plexiglas®, Acrylite®, Lucite® rānei)
Kua oti
Kāore i te maha ngā whakaotinga mata e whakamahia ana ki te kiriaku miihini CNC nā te mea ka ārai te nuinga i ngā āhuatanga whatu o te rauemi. Mēnā e hiahiatia ana he whakaotinga, whiriwhiria tētahi e whakarei ake ana i ēnei āhuatanga.
Paerewa (I te mea kua Mīhinihia): Ka kitea ngā tohu taputapu e kitea ana i runga i tētahi mata kua tapahia hei porowhita.
Pāhūtanga Pītiti: Ka hanga te āhua hukapapa o te kiriaku kia maeneene, ā, ka whakaiti i ngā tohu taputapu e kitea ana.
Te Whakakanapa Ritenga: Ka taea te whakakanapa i te kiriaku kia mārama ake mā roto i ngā tukanga matū, mā te kirikiri ā-ringa mākū rānei, me ētahi atu utu. Ka taea te tono mā te tīpako i te "Ētahi Atu" i runga i te Gazfull Instant Quoting Engine®.
Ngā Tohutohu Hoahoa Penapena Utu
He rauemi e wātea ana te kiriaku, engari me whakarite kia kaua e whakamahia rawatia, e ai ki te whakaahuatanga i raro nei.
Hoahoa ki ngā rahi paerewa: Ko te kiriaku he mea tuku noa i roto i ngā rau matotoru rerekē, me ngā āhua kua whakapūpūtia pērā i ngā ngongo me ngā pae totoka. Mā te hoahoa i ngā wāhanga kia uru ki roto i ngā rahinga o te pepa me te pae kua oti te hanga ka iti ake ngā utu. Mena he nui rawa te wāhanga e hiahiatia ana, whakaarohia te wawahi kia maha ngā wāhanga ka taea te whakapiri, te whakapiri rānei i muri i te miihini.
Te manawanui: He uaua te whakatutuki i ngā ātete tino piripono me ngā kirihou pēnei i te kiriaku. Ka tūtohu mātou kia karangahia ngā ātete kia piripono atu i te +/- 0.005″ mō ngā āhuatanga nui hei whakaiti i te pikinga o te para, te utu, me ngā wā arahi e pā ana ki ngā ātete piripono.
ABS CNC Machining
Ko te ABS, arā, ko te acrylonitrile butadiene styrene, he mea hanga kirihou wera e whakamahia whānuitia ana, kua rongonui haere nā te mea he iti te utu me te pakari. Ko te miihini CNC i roto i te ABS he huarahi whai hua ki te tapahi i ngā wāhanga ki ngā āhua ritenga me te kore e hiahiatia he pokepoke utu nui, inā koa mō ngā tauira, ngā jigs me ngā taputapu, me te iti o te rahinga whakaputa.
E whakamahia ana te kirihou ABS (acrylonitrile butadiene styrene) i roto i te tini o ngā ahumahi nā te iti o te utu, te ngāwari ki te hanga, me ōna āhuatanga miihini tino pai. E kitea ana i roto i te tini o ngā hua kaihoko, ā, e whakamahia whānuitia ana hoki i roto i te ahumahi motuka. He tino pakari, he pakari, he ātete hoki te ABS mīhini CNC, inā koa mō tētahi rauemi iti te utu.
He Tirohanga Poto ki te ABS
| tono | painga | huakore | Wā Lead | Price | Ngā Manawanui |
|---|---|---|---|---|---|
Ngā whare hua, ngā taputapu me ngā taputapu whakakī, ngā papaaho waka | Ātete pānga nui, utu iti, ātete matū | Kāore e pai mō ngā tono pāmahana teitei, kua pakaru i ngā whakarewa, he ngoikore te pumau o te UV | Ka tīmata i te 3 o ngā rā | Iti ($) | Ka taea te whakatutuki i te paerewa ±0.010″; ±0.002″; kei te wātea te iti iho i te ±0.002″ i muri i te arotake ā-ringa |
ABS General
He pai te pumau o ngā āhuatanga o te ABS, he kaha te pānga, ā, he ngāwari te mīhini. Nā tēnei ka pai te ABS mīhini CNC mō ngā tono e hiahia ana ki ngā wāhanga iti te utu me te pakari pērā i ngā taupoki taputapu me ngā anga.
| Te Kaha Tana, Tukua (MPa) | Whakaroa i te Whati (%) | Te mārō (Rockwell R) | Te Wera Pawera Pawera (°C) | Ira Whakarewa (°C) |
|---|---|---|---|---|
40.7 | 53.4 orau | 107 | 97.4 | 267 |
Kia mōhio: Hei tohutoro anake. Ka rerekē pea ngā uara i runga i te momo me te kaihanga.
Kua oti
Ina mahi tahi mātou me ā mātou kaiwhakarato wāhanga ABS CNC, ko te ABS mīhini e wātea ana i roto i ngā tae beige (taiao), mā, me te mangu. Tērā pea ka wātea ētahi atu tae mā te hoko tika.
Kua Mīhinihia: Ka mīhinihia ngā wāhanga CNC ABS kia rite ki ngā whakaritenga me ngā tohu iti o ngā taputapu, o ngā porowhita rānei i runga i te mata o te rauemi.
Te Pānga Pīra: Mō ngā wāhanga ngoikore, ka taea te pania te mata ki ngā pīra karāhe angiangi hei whakaiti i te kanapa. Heoi, mā te whakamahi i ngā kirihou pānga pīra ka kore e ōrite te āhua o ngā mata, ka kino rānei ngā āhuatanga tino taipitopito.
Ngā Tohutohu Hoahoa Penapena Utu
He kirihou tino iti te utu o te ABS, he ngāwari ki te mīhini, ā, he tino pai ngā āhuatanga miihini. Hei penapena utu, me karo ngā kaihangarau i te karanga i ngā manawanui tino piri, nā te mea he uaua ake te whakahaere i ēnei i roto i ngā kirihou wera pērā i te ABS. Anei ētahi atu tohutohu hoahoa whānui e taunaki ana mātou mō ngā wāhanga mīhini CNC:
Ngā āhuatanga hoahoa i runga i ngā papa tuaka kotahi: Mā tēnei ka whakaitihia te hiahia mō ngā mīhini CNC tuaka-4 me te tuaka-5 utu nui ake.
Ko te ōritetanga te mea nui : Mā te pupuri i ngā āhuatanga pēnei i te pūtoro kokonga o roto me ngā kōhao kua patohia kia ōrite, ka āwhina hoki ki te penapena wā me te moni i ngā wāhanga mā te whakaiti i te hiahia mō te whakawhiti taputapu.
Ratonga Mīhini CNC Polycarbonate
He kirihou wera kore-āhua te Polycarbonate, PC rānei. Nā tōna āhua kore-āhua, ka ngawari te tīmatanga i mua i te rewa, ā, kāore he ira rewa kua whakaritea. Ka whakamahia e Gazfull te polycarbonate ki te mīhini pango, ki te pepa mārama rānei, ki te rakau pae rānei. Nā tōna mārama, tōna ātete ki te pakaru, me tōna taumaha mama ake, he pai rawa atu hei whakakapi mō te karāhe. He pai ake hoki te whakahaere i ngā pāmahana teitei i te kiriaku. Heoi, kāore te mīhini CNC i roto i te polycarbonate e whakaputa i ngā wāhanga mārama-whatu, nō reira me whakaoti anō.
He kirihou hangarau te PC (polycarbonate) he tino pakari te pakaru. Ka taea e ia te tu atu ki ngā pānga, me te whakarato i te māramatanga whatu, te ātete ki te UV, me te ātete ki te pāmahana teitei ake i te noa ki te whakataurite ki ētahi atu kirihou hangarau.
He Tirohanga Poto mō te PC Whānui (polycarbonate)
| tono | painga | huakore | Wā Lead | Price | Ngā Manawanui |
|---|---|---|---|---|---|
Ngā karāhe rama motuka, ngā mea whakamarara rama, ngā anga ārai wai | He ātete pānga teitei, he māramatanga tino pai, he ātete pāmahana ngawari (tae atu ki te 275℉/135℃), he pakari pakaru tino pai | He ngāwari te rakuraku, he ngoikore te ātete ki ngā matū | Ka tīmata i te 3 o ngā rā | Waenga ($$) | Ka taea te whakatutuki i te paerewa ±0.010″; ±0.002″; kei te wātea te iti iho i te ±0.002″ i muri i te arotake ā-ringa |
Kia mōhio: Hei tohutoro anake. Ka rerekē pea ngā uara i runga i te momo me te kaihanga.
PC Generic (Polycarbonate)
He rongonui te mahi miihini CNC i roto i te polycarbonate. Nā te ātete tino pai o te rauemi ki te pānga, he mea tino pai mō ngā wāhanga hanganga. E tata ana ki te rua te kaha pānga o te ABS, ā, ko te polycarbonate tētahi o ngā kaha pānga teitei rawa atu o ngā kirihou hangarau noa katoa. He ngāwari te hanga, kāore e ngatata, e whati rānei.
Ngā Āhuatanga Rorohiko Whānui
| Te Kaha Tana, Tukua (MPa) | Whakaroa i te Whati (%) | Maama (Tatahi D) | Te Wera Pawera Pawera (°C) | Paemahana Whakawhiti Karaehe (°C) |
|---|---|---|---|---|
40-154 | 3-233 | 90-95 | 57.2-208 | 142-152 |
Kua oti
He iti noa ngā momo whakaoti mata e mahi ana i runga i ngā kirihou. He tino pono tēnei ina whakamahia te mīhini CNC i roto i te polycarbonate nā te mea he ngawari te rakuraku o te rauemi. Kei raro nei ētahi o ngā whakaoti pea:
Te whakakanapa i te kohu : He maha ngā wā ka puta mai ngā tohu taputapu i runga i te mata o te polycarbonate i hangaia ki te mīhini CNC. Kāore tēnei i te pai mō ngā mahi e hiahia ana kia mārama ngā wāhanga. Ko te whakakanapa, i te nuinga o te wā, ko te tukanga tango i ngā tohu taputapu, i ngā koha rānei, ā, ko tētahi o ngā tikanga whai hua mō te polycarbonate ko te whakakanapa i te kohu. Ka mahi tēnei mā te whakaatu i te mata ki tētahi whakarewa e tauhohe ana, e meinga ai te paparanga mata kia rewa, kia rere. Ka whakataurite te tukanga i te mata, ā, ka whakakī i ngā tohu taputapu.
Paninga ātete-rakuraku : Ko tētahi ngoikoretanga o te polycarbonate ko tōna ngāwari ki te rakuraku. Ko ētahi paninga kei te mākete ka āwhina ki te pupuri i te māramatanga o te polycarbonate me te whakapai ake i tōna ātete ki te rakuraku.
Ngā Tohutohu Hoahoa Penapena Utu
He kirihou utu nui te polycarbonate. Kei raro nei ētahi tohutohu hoahoa hei penapena utu.
Ngā Huinga-iti: Ka tukuna te PC mō te mīhini i roto i te pepa, i te rakau pae rānei. Nō reira, i te wā e mīhini ana i te polycarbonate, he mea nui kia hoahoahia ngā wāhanga me ngā rahi paerewa. Ka nui rawa te utu mō ngā wāhanga nunui i mīhinihia mai i te poraka kotahi o te polycarbonate. Engari, whakaarohia te hoahoa i ngā huihuinga-iti motuhake ka honoa ngātahitia i muri mai, ka honoa rānei mā te whakarewa kirihou.
Ngā āhuatanga ōrite: Hoahoa me ngā āhuatanga ōrite hei whakaiti i te whakamahi taputapu motuhake, te whakawhiti taputapu rānei.
PEEK Miihini Miihini
He kirihou hangarau matatau a PEEK, he polyetheretherketone rānei, he maha ngā āhuatanga pai. Kei roto i ēnei ko te manawanui i ngā pāmahana tiketike, te ātete ki te pakū, te hototahi ki te koiora, te ātete ki te korehau tino tiketike, te ātete matū tino pai, me te pai mō te miihini CNC.
He kirihou wera haurua-kiriata a PEEK ka taea te mahi tonu i ngā pāmahana tae atu ki te 260°C, ā, he tino ātete ki ngā matū. Heoi, me mōhio ka memeha te rauemi i ētahi waikawa pēnei i te waikawa whanariki. Ko te miihini CNC i roto i te PEEK he huarahi noa ki te hanga wāhanga hei whakamahi i roto i ngā taiao tino kino e hiahia ana ki te kaha miihini, te pumau matū, me/ranei te ātete ki te pāmahana teitei. Kei roto i ngā tono ngā wāhanga mō ngā ahumahi hauora, rererangi, me te motuka.
TIROHIA I TE WĀ TAPAHI
| Taupānga | painga | huakore | Wā Lead | Price | Ngā Manawanui |
|---|---|---|---|---|---|
Ngā peera, ngā mōri me ngā taputapu, ngā tāpiringa tuaiwi, ngā taputapu pokanga | Ātete ki te wai, iti te putanga hau i roto i ngā āhuatanga korehau teitei, hototahi ki te koiora | He nui te utu, he hototahi ki te koiora engari kāore e piri wawe ki te wheua | E toru ngā rā pakihi ka tīmata te wā ārahi mō ngā wāhanga PEEK | Teitei ($$$) | Ka taea te whakatutuki i ngā ātete mīhini o te +/- .001” (+/- 0.025 mm) |
PEEK whānui
Mā te mīhini PEEK ka taea te whakamahi i te whānuitanga o ngā tono e whakamahi ana i ngā āhuatanga tino pai o tēnei rauemi. He iti noa ngā ngoikoretanga o PEEK ina whakaritea ki ētahi atu kirihou hangarau. Ko tētahi painga e wehewehe ana i a ia ko tōna ātete ki te wera. Ka taea e ia te mahi i ngā pāmahana teitei mō te roa atu i te nuinga o ngā kirihou. Hei tāpiri, he ātete wai a PEEK, nō reira kāore e mimiti wawe i te wai, ā, he iti noa iho te hau e puta mai ana i raro i ngā āhuatanga korehau. He rawa nui tēnei pumau. Kei roto i ngā whakamahinga a PEEK ngā tono hauora mō ngā whakaurunga rangitahi tae atu ki ngā wāhanga rererangi e pāngia ana e te korehau tino nui.
Ngā Taonga Whānui o PEEK
| Te Kaha Tana, Tukua (MPa) | Whakaroa i te Whati (%) | Maama (Tatahi D) | Te Wera Pawera Pawera (°C) | Paemahana Whakawhiti Karaehe (°C) |
|---|---|---|---|---|
65-120 | 1.5-110 | 62-89 | 182-210 | 143-155 |
USP Akomanga VI PEEK (TECAPEEK)
Ko te PEEK kua whakatauria mō te USP Akomanga VI, pērā i te TECAPEEK MT, he momo hototahi ki te koiora i hangaia mō te whakamahi me te hangarau hauora. He tino teitei te ātete matū, he ātete ki ngā momo tikanga whakahoromata, me te kaha ki te pupuri i ōna āhuatanga miihini i roto i ngā pāmahana teitei. He maha ngā wā ka whakamahia te peek kounga hauora mō ngā tono hauora me ngā taputapu e hiahiatia ana he iti noa te pa atu ki te kiri me te kiko. He mea pai hoki te USP Akomanga VI PEEK mō te whakamahinga hauora nā tōna kaha ki te pupuri i ngā huringa whakahoromata maha me te kore e pirau.
| Te Kaha Tana, Tukua (MPa) | Whakaroa i te Whati (%) | Maamaa (Rockwell M) | Te Wera Pawera Pawera (°C) | Paemahana Whakawhiti Karaehe (°C) |
|---|---|---|---|---|
96.5-110 | 30-50 | 94-99 | 160 | 150 |
Peek GF30
Ko te PEEK GF30 he momo PEEK kua whakakīia ki te karāhe 30%. Ki te whakatauritea ki te PEEK whānui kāore i whakakīia, he pakari ake te GF30, ā, he kaha ake te miihini. He pakari ake hoki te āhua o te PEEK kua whakakahangia ki te karāhe, ā, he kaha ake te ngoki. He pai tēnei rauemi mō ngā wāhanga e pāngia ana e ngā kawenga pūmau teitei i ngā pāmahana teitei ake. Kāore i te pai te PEEK GF30 mō ngā tono peera, te mau rānei nā te pānga o te muka karāhe ki ngā mata e hono ana.
| Te Kaha Tana, Tukua (MPa) | Whakaroa i te Whati (%) | Maamaa (Rockwell M) | Te Wera Pawera Pawera (°C) | Paemahana Ratonga Morahi (°C) |
|---|---|---|---|---|
101-157 | 2.2-5 | 103 | 316 | 260-300 |
Kua oti
He hina mātotoru, he parauri rānei ngā wāhanga o PEEK. Nā te hanganga pūmua o PEEK, he uaua ki te piri ngā peita me ngā paninga ki tōna mata. Heoi, nā tōna ātete matū, he pai tonu te waiho i ngā wāhanga kia rite ki te mīhini.
Kua Mīhinihia : He ngāwari te mīhini i a PEEK, ā, ka taea te whakatutuki i ngā whakaotinga mata maeneene. Ka tukuna e Gazfull te whakatau-aunoa i ngā taratara o te mata tae atu ki te 32uin Ra mō PEEK engari ka taea te whakatau i ngā uara iti ake mā te arotake ā-ringa.
Te Pāhūtanga Pīra : Ka taea te tango i ngā tohu taputapu kāore e hiahiatia mā te miro ā-ringa i te mata ki ngā pīra karāhe.
Ngā Tohutohu Hoahoa Penapena Utu
Nā te nui o te utu o te rauemi, me whakaiti ngā utu hanga. Ko tētahi tikanga hei āwhina i te whakahaere i te utu o te miihini CNC i roto i te PEEK ko te tono kia whakamahanahia i te wā e hangaia ana. Mā tēnei pea ka whakaitihia te pakaru o te mata me te pakaru o roto, ka whakaitihia te tere para me te whakaiti i ngā utu katoa mō te kaihanga.
Mīhini CNC Teflon (PTFE)
Ko te PTFE, polytetrafluoroethylene rānei, he kirihou wera i ahu mai i te fluoropolymer, he mea hanga katoa mai i ngā ngota waro me te fluorine. E mōhiotia whānuitia ana ko tōna ingoa hokohoko DuPont, ko Teflon. Ko ngā āhuatanga ātete pāmahana o Teflon kei roto i ngā mea tino teitei o ngā kirihou hangarau katoa. He tino ātete hoki ki te waikura nā tōna hanganga matū fluoropolymer. Ko te miihini CNC i roto i te PTFE-Teflon he miihini CNC. He tino ngāwari te PTFE-Teflon nā tōna kaha iti me tōna ngawari, ahakoa he uaua pea ki te pupuri i ngā taumata teitei o te tika.
He rerekē te PTFE-Teflon i te nuinga o ngā kirihou hangarau nā te mea he tino teitei te ira rewa, he iti te tauwehenga waku, ā, he koretake hoki te matū. Nā ēnei āhuatanga rerekē kua rongonui ai ngā paninga PTFE-Teflon i roto i ngā taputapu tunu kai kore-piri me ētahi atu tono i roto i ngā ahumahi kai me te inu, te hinu-matū, te hauora, me ngā wāhanga hiko.
He Tirohanga Poto mō te PC Whānui (polycarbonate)
| tono | painga | huakore | Wā Lead | Price | Ngā Manawanui |
|---|---|---|---|---|---|
Ngā tāpiringa hauora, ngā paninga paipa mō ngā matū waikura, te whakamarumaru o ngā wāhanga hiko | Haumaru-kai, ātete-wai, ātete pāmahana teitei, tauwehenga waku iti | Ka puta he auahi paitini ina wera rawa, he ātete ngoikore ki te pakū | Ka tīmata ngā wā tuku i ngā rā e 3. | Waenga ($$) | Ko te paerewa o te manawanui ko +/- 0.010” ; ka taea ngā manawanui +/- 0.001″. |
Wahine PTFE-Teflon
Ahakoa te whakamahinga matua o te rauemi hei paninga, ka hangaia ētahi whakaurunga hauora mā te miihini CNC i roto i te PTFE-Teflon. He koretake te Teflon, nō reira kāore ngā whakaurunga hauora i hangaia mai i tēnei rauemi e peia e te tinana. Nā te iti o te tauwehenga waku, he mea tino pai mō ngā wāhanga paheke-pa pērā i ngā peera.
Ngā Āhuatanga PTFE-Teflon Whānui
| Te Kaha Tana, Tukua (MPa) | Whakaroa i te Whati (%) | Maama (Tatahi D) | Te Wera Pawera Pawera (°C) | Te Pawera Whakarewa (°C) |
|---|---|---|---|---|
9-30 | 300-400 | 55-65 | 115 | 330 |
Kia mōhio: Hei tohutoro anake. Ka rerekē pea ngā uara i runga i te momo me te kaihanga.
Kua oti
He tino ātete te Teflon ki ngā paninga nā tōna āhua hei mata kore-piri. He maha ngā wā ka waiho e te Teflon he kopa ki ngā taha kua mīhinihia, engari ka tangohia aunoatia ēnei e Gazfull i mua i te tukunga atu o te hua kua oti.
Kua Mīhinihia : He pai ake te waiho i te wāhanga i roto i tōna āhua mīhini.
Pūwero Pīra : Mō te āhua maeneene ake, me te tango i ngā hapa, ka taea te pūwero i ngā wāhanga ki te pīra kia maeneene ōrite ai te mata.
Ngā Tohutohu Hoahoa Penapena Utu
He uaua pea te mahi miihini CNC i roto i te PTFE-Teflon, inā koa mēnā e hiahiatia ana he ātete pakari. Nō reira, he mea nui kia tere, kia ngāwari hoki te tukanga miihini.
Ngā āhuatanga hoahoa i runga i ngā papa tuaka kotahi: Mā tēnei ka whakaitihia te hiahia mō ngā mīhini CNC tuaka-4 me te tuaka-5 utu nui ake.
Ko te ōritetanga te mea nui : Mā te pupuri i ngā āhuatanga pēnei i te pūtoro kokonga o roto me ngā kōhao kua patohia kia ōrite, ka āwhina hoki ki te penapena wā me te moni i ngā wāhanga mā te whakaiti i te hiahia mō te whakawhiti taputapu.
Garolite G-10 mo te miihini CNC
He mea hanga te Garolite i te muka karāhe me te kapia epoxy phenolic. Hei mea hanga te garolite, kāore e taea te whakarewa me te hanga anō. Mēnā ka werahia ki runga ake i tōna pāmahana mahi tino teitei, ka pakaru te matū, ā, e kore e mau tonu ōna āhuatanga ina whakamataohia. Nā tēnei ka kore e taea te werohanga i roto i te garolite. Ko te miihini CNC i roto i te garolite anake te tikanga hanga wāhanga uaua me tēnei rauemi.
He rauemi epoxy whakakaha karāhe te Garolite, he nui te ōwehenga kaha-ki-taumaha, ā, he tino ātete ki te waikura me te makuku, he mea tino pai mō ngā mahi moana. He ātete ahi hoki, ā, he pai hoki hei ārai hiko, he mea pai mō ngā papa hiko.
Karoriti G-10 (FR4)
Mā te miihini CNC i roto i te Garolite G-10 (FR4) ka puta ngā wāhanga e tino pai ana mō ngā mahi waikura, makuku nui rānei. I te nuinga o te wā, ka kitea ēnei huinga o ngā āhuatanga taiao i roto i te umanga moana, ka whakamahia te garolite mō ngā wāhanga miihini pēnei i ngā whāriki whakairi me ngā mahi e hiahia ana ki te whakamarumaru hiko me te kaha ā-mīhini.
Kei a Gazfull ngā karāhe G-10 me te G-10 FR4. Ko te FR4 he karāhe ātete ahi o te Garolite G-10 me te whakatauranga mura o UL94 V-0. He rite tonu ngā āhuatanga o ngā rauemi e rua engari ko te whakatauranga mura pai ake o te FR4. I te nuinga o te wā, ka taea te whakakapi haumaru i te G-10 FR4 ina hiahiatia he G-10; heoi, kaua e whakakapia te G-10 ina hiahiatia he FR4.
General Garolite G-10 (FR4) Rawa Rawa
| Te Kaha Tana, Tukua (MPa) | Kaha Kōpeke (MPa) | Maamaa (Rockwell M) | Whakatauranga mo te mura | Te Pāmahana Whakahaere Tonu (°C) |
|---|---|---|---|---|
262-310 | 448 | 110 | UL94 V-0 | 140 |
Garolite G11 (FR5)
He rite ki te G-10, he rauemi raima karāhe-epoxy te garolite G-11 (FR5). He pai ake te ārai wera o te G11 i te G10, ā, ka taea e ia te tu atu i ngā pāmahana mahi teitei ake. Nā tēnei he kōwhiringa pai mō ngā tono miihini, hiko rānei ka whakamahia i roto i ngā taiao pāmahana teitei.
General Garolite G11 (FR5) Rawa Rawa
| Te Kaha Tana, Tukua (MPa) | Kaha Kōpeke (MPa) | Maamaa (Rockwell M) | Whakatauranga mo te mura | Te Pāmahana Whakahaere Tonu (°C) |
|---|---|---|---|---|
255-295 | 434 | 112 | UL94 V-0 | 150 |
Kua oti
He mea matomato ki te kōwhai-kakariki te Garolite i te nuinga o te wā, engari ka hokona hoki i te pango. Kāore e roa te whakakanapa nā te mea he muka tōna. I te nuinga o te wā, kāore e kanapa te mata matte ina whakakanapahia.
I te mea kua Mīhinihia : He maeneene te āhua o te Garolite i muri i te mīhini. Ko te tikanga o tēnei, kāore ngā wāhanga e toe ana i roto i tō rātou āhua mīhini e whakararu i te ataahua.
Te Pahūtanga Pīra: Ka taea te pahūtanga pīra i ngā wāhanga i hangaia ki te garolite hei tango i ngā mata koretake i puta i te wā miihini.
Ngā Tohutohu Hoahoa Penapena Utu
He kirihou hangarau utu nui te Garolite, nō reira, he mea nui kia whakawhāitihia ngā utu hangahanga mēnā ka taea.
Te hoahoa kia rite ki ngā rahi paerewa: Ko te Garolite he pae, he tokotoko, he ngongo, me te rau anake. I te hoahoa i ngā wāhanga mai i tēnei rauemi, kia tupato ki te ako i ngā rahi e wātea ana, kātahi ka hoahoa kia tutuki ai aua herenga. Ko te iti o ngā rauemi e tangohia ana hei whakatutuki i ngā rahinga whakamutunga ka nui ake te penapena utu i runga i te maumau rauemi me te wā e pau ana ki te miihini. Ko te miihini CNC i roto i te garolite me whakamahi i ngā taputapu taimana, i te superalloy rānei, nō reira he rauemi utu nui ki te miihini.
PVC CNC Machining
Ko te PVC tētahi o ngā kirihou hangarau e whakamahia whānuitia ana. E rua ngā āhua: ko te PVC kua whakakirikiritia me te PVC kāore i whakakirikiritia. Ka whakamahia te PVC kāore i whakakirikiritia ki ngā wāhanga pakari pērā i ngā paipa me ngā hononga. Ko te miihini CNC i roto i te PVC ka mahia whānuitia ki tēnei momo pakari o te rauemi. Ka whakamahia te PVC kua whakakirikiritia ki ngā tono e hiahia ana ki te ngāwari pērā i ngā taura, i ngā ngongo iti rānei.
He iti ake ngā rauemi mata kāore e taea te whakahou i te rahinga o te hanga PVC i te nuinga o ngā kirihou kē atu, ā, koinei tētahi o ngā kirihou matomato rawa atu e wātea ana. He rite te miihini CNC i roto i te PVC ki ērā o ētahi atu kirihou hangarau, ā, nā tōna pakari me tōna mārō, he ngāwari noa iho te mahi miihini.
Mā te mahi miihini PVC ka hua ake he wāhanga iti te utu, he tino pai ngā āhuatanga miihini, ā, he ātete hoki ki ngā āhuatanga o te rangi. Nā te ātete o te rauemi ki te makuku me te UV, he mea ātaahua mō ngā mahi pēnei i te paipa me ngā hononga paipa.
PVC mārō/Kaore i whakakikoruatia
| Te Kaha Tana, Tukua (MPa) | Whakaroa i te Whati (%) | Maama (Tatahi D) | Te Wera Pawera Pawera (°C) | Whakatauranga Mumura (UL 94 (1.5 mm)) | Tae |
|---|---|---|---|---|---|
45.6 | 110 | 80 | 72.5 | HB-5VA | Gray |
Kua oti
He rerekē tēnei i te nuinga o ngā kirihou hangarau, ā, ka taea te peita i te PVC mō ngā kaupapa ataahua me te roa ake o tōna oranga ki waho. Me mōhio anō hoki, ahakoa he rite tonu ōna āhuatanga hangarau, ka memeha haere te tae o te PVC mārama ina pāngia e te rā, e ētahi atu pūtake UV rānei.
Peita: Ka taea te peita i te PVC mena kāore he whakarewa e whakaeke ana i te polyvinyl chloride i roto i te peita. Kia tino mohio kua hangaia tō peita kia pai te mahi ki te PVC me te kore e whakaiti i ōna āhuatanga miihini.
Kua Mīhinihia : He māmā noa te mīhini i te PVC, ā, ka puta he mata maeneene, he kanapa, me te kore e hiahiatia he mahi tāpiri.
Ngā Tohutohu Hoahoa Penapena Utu
Ka hangaia e te mīhini CNC i roto i te PVC he wāhanga mama, he iti hoki te utu. Heoi anō, mā te tohutohu e whai ake nei ka taea te whakaiti i ngā utu:
Ngā Huinga Iti: Kei te wātea te PVC hei pepa, hei rakau rānei i roto i ngā rahi rerekē. Whakamaherehia tō hoahoa kia taea ai e koe te hanga i ngā wāhanga mai i ēnei rahi taketake, ka huihuia i muri mai ki te wāhanga whakamutunga. He ngāwari te tiki i ngā kāpia PVC, ā, ka taea te whakamahi hei hanga i ngā wāhanga uaua mai i ngā huihuinga iti maha, he iti te utu.
He rite tonu ngā tikanga hoahoa o ngā kirihou CNC ki ngā konganuku mīhini CNC, nō reira whakamahia ngā tikanga hoahoa mīhini pai rawa atu i ngā wā katoa e taea ai.